Used Forklifts Berkeley - There are some advantages and disadvantages to using both electric and internal combustion (IC) trucks. Electric engines cost less to maintain over their life span because they require less maintenance. The battery must last five years minimum if the manufacturer's guidelines for maintenance and charging are followed. Costs for overnight charging are normally low. Electric trucks tend to be highly maneuverable and compact units, specially the kinds with three wheels. Drive, lift, tilt, auxiliary and acceleration speeds are adjustable and can be changed depending on the use and the driver's preferences. Electric trucks are easier on the natural environment and are quiet. Not best to be used in wet conditions are electric trucks. Because of the need for battery recharging, they cannot be used continuously. They are not suitable on rough terrain. The energy consumption is high on ramp work and continuous high lifts. IC engine diesel/LPG has the advantage of being best for continuous outdoor application and uneven surfaces. With no need for battery charging, the forklift could be used throughout the evening and overnight. Supply and transport of fuel should be factored into costs. Initial expenses are less than for an electric truck, but long term costs related to maintenance and fuel are higher. IC engines have bigger capacities than electric, but less adaptability. LPG can be used in several indoor applications. IC Engine diesel/LPG produces more noise and higher emissions compared to electric. LPG has lower emissions compared to diesel. A reach truck is used to stock up supplies, pallets of goods, and to keep storage areas tidy. The reach truck comes in quite a few types: the stand-up reach, double-deep reach and straddle reach. The stand-up is the simplest. The forks of the truck slide underneath the pallet and move it to the appropriate storage place. The forks slide the pallet into place. This particular type of reach truck is recommended when shelving units are one pallet in depth. Best for workplaces where the shelving units are deep enough to accommodate two pallets of goods, the double-deep reach truck, which is similar to the stand-up, is usually used. This particular version consists of telescopic forks intended to position the pallet at the rear of the shelving unit. This saves having to push the pallet back when another pallet has to go into the same shelving section. The added advantage of straddle reaches is that they can both slide underneath the pallet and grasp the sides also. These are suitable for workplaces where shelving units could be accessed in multiple directions. This version is best in conditions where goods would not be damaged if the pallet sides are grabbed. In nearly all warehouses, there are normally more than one type of reach truck. Textile firms and manufacturing facilities utilize various kinds of reach trucks in their supply areas. The reach truck is not hard to utilize and could increase productivity while making the most of available storage space. Since 1986, Caterpillar has become a household name within the manufacturing of construction and mining equipment, industrial gas turbines, diesel-electric locomotives, diesel engines and natural gas engines. CAT features a range of machines that is marketed under several brands which include Caterpillar, CAT, SEM, FG Wilson, MAK, Solar Turbines, Progress Rail, MWM, EMD, and Perkins. The company has become a global leader in numerous operating segments and manufactures specialty equipment for different fields such as Resource Industries, Construction, financial products and Energy and Transportation. The bulk of the fleet is organized through the vast network of dealerships that serve 190 nations world-wide. All Toyota machines and parts built within North America adhere to the International Organization for Standardization or ISO 14001 standard. TIEM has been honored many times for its commitment to continuous development, and its environmental methods. It is the first and only maker to offer EPA and CARB-certified Compressed Natural Gas powered lift trucks on the market. For example, the Toyota 8-Series IC lift trucks emit 70 percent fewer smog forming emissions than the existing centralized EPA standards and have complied with California’s strict emission standards and policies. Doosan Heavy Construction Equipment supplies the market with heavy equipment this includes wheel loaders, articulated dump trucks, countless heavy equipment accessories, log loaders and crawler excavators. They have risen to develop into the fifth most well known developer of construction equipment across the globe. launched as Park Seung Jik Store in Baeogia, Seoul as a trading enterprise. In 1996, the enterprise started to focus on infrastructure support and is now the oldest and longest operating corporation in South Korea. Doosan has expanded into a worldwide conglomerate that is focused in the construction business. Business acquisitions feature Doosan Infracore, previously Daewoo Heavy Industries and Machinery in 2005. The company evolved into the world’s leading small construction equipment supplier by 2007, after acquiring Bobcat USA, worth 4.9 billion. Having approximately 38 thousand employees in thirty-seven countries, Doosan Group grew to become the globe's seventh most well known construction equipment distributor. In 2018, the corporation happily produced its’ 400,000th excavator.
Taylor: Used Taylor Counterbalance Forklift Berkeley - Getting Aboard the Lift truck Amongst the keys to maintaining operator safety is the 3-point dismount. Even if this is often ignored, it is a key issue in maintaining operator safety. For instance, a few years ago, at a forklift rally, a participator perfectly carried out the course at a forklift rally. At the end of his run, he was so thrilled, that he jumped off of his machine and forgot to make a 3-point dismount. The judges ended up docking marks from his overall score and he didn't win the competition. The very serious problem of dismounting and mounting the forklift is included in training. Having the operators wear their seatbelts can also help save their lives in case of any tip-overs. It is vital to know that if the center of gravity of a loaded lift truck moves outside of the stability triangle then a tip-over situation can occur. Trained drivers seldom ever run into a tip-over situation, although, it is really important that they are ready for that possibility in case it occurs. Mount/Dismount The importance of correctly dismounting and mounting any kind of forklift, including even a low platform pallet jack is essential to ensuring the operator stays safe. Far too many injuries result when complacency happens around these machinery. Some of the serious situations include: Driver's catching their coveralls or loose clothing when dismounting and can end up falling and wrenching their back. Sometimes, the driver could sprain or break an ankle when they step off of a forklift. The operator can accidentally break an arm when slipping and falling off of the pallet jack. The driver can suffer from torn shoulder muscles if they slip on floor debris while they are still hanging onto the handhold utilizing one hand. In order to keep you safe, having 3 points of contact is essential. Obtaining 3 points can be done with 2 hands and 1 foot or by 2 feet and 1 hand. This stance is precisely like climbing up or down a ladder. Don't forget to always face the machine. Drivers normally have a tendency to face away from the equipment or to hop or jump off the equipment and these mistakes greatly reduce the overall risk of injury to themselves. For lots of companies, Taylors counterbalance lift trucks provide a great solution. They can withstand a variety of conditions and environments and are extremely durable. They are reliable and built to last.
Daewoo: Used Daewoo Gas Forklifts Berkeley - Dangers of Type-G forklifts Forklifts perform an essential part in the operations of warehouses and other businesses. These equipment are capable of lifting and transporting immense loads from one place to another. There are numerous variations on the lift truck. The primary variation is the way in which various types of forklifts are fueled. "LP" lift trucks are the most common type. They utilize liquid propane. Type "E" forklifts operate on electricity and have big rechargeable batteries. Type "D" lift trucks are fueled by diesel and type "G" operate on gasoline. Though all forklifts, like any piece of heavy machine, could pose a hazard, gasoline powered forklifts pose the most risks. Fire Forklifts labelled type G can present a fire hazard. Gas forklifts are not made with the same rigorous standards. Gas leaks are the biggest cause of fire due mostly to gas leaks and also escaped gas fumes. This can result driving on really rough terrain and from normal wear or from mishaps. These circumstances pose a risk and can lead to fire. Therefore, a standard Type G lift truck must never be utilized in conditions where elevated fire risk is deemed unacceptable. Like for instance, these kinds of forklifts must not be used around explosives or dangerous chemicals. Explosion Type G lift trucks also pose a danger of explosion, as do those that operate on diesel and liquid propane. A type of lift truck which run on gasoline can explode as a result of a serious mishap in circumstances where an ignition source and a gasoline leak are present. An explosion could take place when sparks are created in the collision and the sparks ignite the gasoline. Fumes and Exhaust Type G lift trucks pose a serious inhalation hazard due to toxic fumes. Gasoline fumes can be deadly in high concentrations. Fumes could result from gasoline leaks or from the exhaust itself. Thus, a Type G lift truck is really not recommended for any environment that is poorly ventilated. The exhaust would present a serious danger in enclosed places. This particular type of forklift must be utilized carefully when operated in close proximity to people.
Terex: Used Terex Man Lifts Berkeley - Terex Manlift Specifications Terex is a Westport, Connecticut company that specializes in producing in manufacturing construction machinery. Equipment like boom lifts, aerial lifts and manlifts. These machinery are designed to facilitate access to areas that are hard to reach, large equipment, buildings and roofs, amongst other things. A manlift, as defined by the U.S. Occupational Safety and Health Administration or also known as OSHA refers to a power-driven endless belt. This belt only moves in one direction and includes platforms, or steps or handholds which are connected to the unit to be able to transport personnel from every floor. TB85 The Terex TB85 offers a maximum working height of 91 feet. Moreover, the platform's maximum height reaches 85 feet. This model's maximum width is 8 feet, 1 and 1/2 inches. The TB85 has dimensions measuring 9 inches wide and 9 feet, 1-inch high by 36 feet. This model provides a reach of 70 feet. The TB85 has a boom angle below horizontal measures at -14 degrees and above horizontal measuring 75 degrees. Terex TB100 The Terex TB100's maximum working height is 106 feet and the maximum height of the platform is 100 feet. When the TB100 is stowed it is 8 feet, 1 1/2 inches wide by 9 feet high by 8 feet. The maximum width of the unit is 8 feet, 1 1/2 inches. The boom angle above horizontal is 75 degrees and below horizontal is 14 degrees. The horizontal reach measures at 67 feet, 4 inches. TB110 The Terex TB110 man lift reaches a max height of 100 feet, whilst the max working height reaches 116 feet. The model is 8 feet wide x 9 feet, 4 inches high The TB110 offers a horizontal reach of 67 feet and a maximum width of 8 feet. This particular model has a boom angle of 75 degrees above horizontal plus 10 degrees articulating. It measures -105 degrees articulating and below horizontal it is -14 degrees.
Yale: Used Yale Warehouse Forklifts Berkeley - Yale Narrow Aisle Trucks The Narrow Aisle forklifts produced by Yale have been engineered and made with all the ergonomic comfort and particular specifications any operator would need. Yale makes sure they design and build narrow aisle trucks that meet the different requirements of businesses and their certain applications. Yale forklifts provide efficient drive motors which are proven for their dependability, robustness and supreme performance. In addition, the Yale Hi-Vis masts provide original engineering for unsurpassed visibility and solid construction. Very Narrow Aisle The very narrow aisle trucks are intentionally designed for utmost storage density. Yale' s very narrow aisle trucks are especially made for case picking and pallet handling applications that range from 16 to 55 ft. The company features the NTA for high density warehousing situations which need maximum throughput applications. NTA Productivity Enhancements Electronically Programmable Pantograph: The electronically programmable pantograph provides variable stroke length. This feature eliminates the time-consuming "double-biting" at pick up and deposit stations. Motorized Pallet Trucks: The walkie trucks, rider pallet trucks or walkie-riders are other names for the Motorized Pallet trucks. The operators walk behind the walkie version that is useful for transporting loads in small places. The walkie-rider and rider units are really helpful for moving cargo over longer distances. These units are designed so that the operator could stand on a small platform. AC Motor Technology: The AC Motor Technology has responsive directional changes, offers smooth and rapid acceleration and has a high starting torque. Smart-Glide Height Sensing System: The Smart-Glide Height Sensing System offers maximum travel speed at various fork heights. It also provides step-less speed control by its ability to optimize travel speed. Tri & Quad Form Mast: This stiff mast minimizes deflection and provides operator stability. CANbus Controller: Wiring is reduced by 40% with the CANbus controller and electrical connections are lessened by 25% with the controller that results in enhanced visibility through the mast and better reliability overall. Auto Deceleration System: The Auto Deceleration System helps to eliminating the need to manually utilize the service brake, which in turn enhances productivity and reduces operator fatigue. Thermal Management System: This system adjusts and monitors performance and component temperature. This allows trucks to run a lot longer and cooler. 180�° Rotating Turret Head: This specially designed rotating turret head allows the operator to greatly maximizes storage density and easily service both sides of the aisle.
Kaldnes: Used Kaldnes High Capacity Forklift Berkeley - The high precision hydrostatic drive train is now incorporated into the 10 to 18 ton heavy truck range of material handlers. This drive train operates with no clutch, gearbox, conventional or differential brakes. The modular design makes this an extremely compact truck popular for both versatility and maneuverability. Features, like spacious, cushioned cab, panoramic mast and a functional, intuitive control layout, make the operator's environment very comfortable. A wrap-around front screen offers unsurpassed visibility. These trucks are rugged and highly adaptable, capable of handling loads that are both palletless and palletized. Moreover, they are designed for empty container handling. This truck is great for a variety of uses in heavy industry. To allow optimal through-mast visibility to the fork tip and load, the cabin is situated in a forward position. This ensures the optimal degree of load control and maneuverability in tight areas. To guarantee optimal visibility around the equipment from the driver position, there are broad glass panels to the sides, top and rear and a curved widescreen providing uninterrupted visibility. The mid-heavy trucks in the 18-32 ton range all have 3-speed automatic transmissions powered by high torque diesel engines. Trucks in this range offer precision control of travel and load handling cycles for many different tasks. The modular design makes this a really compact truck with a lot of versatility and maneuverability. Features, like cushioned, spacious cab, panoramic mast and an intuitive, functional control layout, make the operator's environment extremely comfortable. A wrap-around front screen provides unsurpassed visibility. These trucks are rugged and highly adaptable, capable of handling both palletless and palletized loads. What's more, they are designed for empty container handling. This truck is truly great for various uses in heavy industry.
Caterpillar: Used Caterpillar Big Forklifts Berkeley - Kinds of Forklifts Forklifts are used to lift and move loads that are heavy, usually within warehouses and construction sites. They are usually found in material handling and other manufacturing operations. There are various types of forklifts utilized for different kinds of applications. The way forklifts are powered is the main difference between them. Some use internal combustion motors and some are electrical powered. For lifting loads which are heavy while maintaining low operating expenses, the best choice are usually electric forklifts. Electric forklifts are most often found in indoor work environments. Internal combustion forklifts are recommended for outdoor uses. A fork truck, motorized drive and manual drive are the three types of forklifts. Fork trucks are motorized and have backup alarms and cabs. Motorized drive forklifts usually have a protected seat for the operator. Manual drive forklifts are powered manually. To be able to prevent tipping over, several forklifts are counterbalanced. Other safety features include handrails or turntables. Specialty forklifts are available for certain applications. For instance, narrow aisle forklifts are designed to work in very tight spaces. Rough-terrain forklifts work well on surfaces which are rocky and uneven.
Crown: Used Crown Stand Up Forklift Berkeley - Crown has made their RC 5500 Series to focus on the realistic difficulties faced in the workplace. This ground-breaking model features best-in-class comfort and ergonomics and intelligent technology. Keeping the operator comfortable and safe usually results in more efficiency. 3-Wheel Stand-Up Counterbalanced Truck The 3-Wheel Stand-Up Counterbalanced Truck comes in 3000, 3500 and 4000 pound capacity. Performance Versatility Crown's RC 5500 have been designed to work efficiently in a busy work environment. Whether it is operating on the dock or in an aisle, this model achieves greatness. It has been made to offer the operator unparalleled ride control, unmatched visibility and the best ergonomics. The exclusive FlexRide technology provided by Crown provides a suspended floorboard so as to eliminate a lot of the vibration and shock that operators should work with on a daily basis. Interestingly enough, many of the competitor's sit-down truck models are unable to match the reduced impact levels offered by the RC 5500 Series. Visibility - From a side-stance position in both directions of travel, this model provide maximum visibility for the operator. A low-profile provides a clear view mast as well a sculpted chassis enables the operators to be able to clearly see the fender, the fork tips and all around the truck. This optimum view enhances overall safety and lessens damage. Speed - Top travel speeds are amongst the best in the industry and achieved through Access 1 2 3 Technology combined with the newest AC traction control. Performance levels are able to be custom tuned to be able to match the application requirement or the operator's skill level. Operator Safety & Comfort Crown's FlexRide has a suspended floorboard which could greatly enhance the overall work performance of the worker by enhancing their comfort and lessening their fatigue. The constant vibration and shock can result in severe operator fatigue for those exposed to those motions on a daily basis particularly during travel over rough surfaces, dock plates and expansion joints.
Jungheinrich: Used Jungheinrich Pneumatic Tire Forklift Berkeley - Inspecting your Fork Truck for Safety A fork truck, similar to any industrial machinery, must be operated carefully. Unlike an automobile, a fork truck is steered from the rear wheel and hence has a different center of balance. Anyone working within the vicinity of a fork truck and anybody utilizing this particular machinery needs to know workplace safety guidelines and safe operating procedures. Safe operation of a forklift before driving it will include a visual inspection. Worn tires and fuel leaks are potential dangers that an operator needs to inspect. The lifts, forks and the overhead guard must be carefully inspected. The safety handle should be utilized when the forklift is being mounted. The alarms, lights and horns must be inspected to ensure that they are operating properly. Monitors and gauges should be adjusted correctly. Safety belt must be fastened and seat adjusted prior to starting the truck. Taking cautious turns and choosing a lower rate of speed would help the operator avoid tipping the equipment. If the load blocks the vision of the driver, the truck must be driven in reverse gear. Be aware of the location of any pedestrians and obstacles when driving. To prevent any risk of injury, the operator must always sit inside the cage enclosure and keep all parts of the body inside. The forks must be kept several inches above the ground when driving. Never lower or raise lifts while you are driving or the truck can become unstable. Do not permit anybody to walk under lift when the engines are running. Stopping at intersections and watching for approaching traffic are basics for driving safely. It is a great idea to sound the horn occasionally and before proceeding when operating in aisles. That way, you would warn any approaching person to your presence.
Mitsubishi: Used Mitsubishi Cushion Tire Forklifts Berkeley - In order to utilize any kind of lift truck, specific OSHA requirements have to be met. Some businesses provide basic awareness training to other individuals like visitors and office staff or sales people and other non-operators who might venture into the warehouse or yard. Even if OSHA doesn't specifically deal with lift truck pedestrian training, the OSHA General Duty Clause dictates that employers need to take measures so as to protect employees from certain risks, such as pedestrians exposed to moving lift trucks. Pedestrian safety is a huge concern that needs to be dealt with and not disregarded. According to the NIOSH or the National Institute for Occupational Safety and Health; around 20 percent of all forklift mishaps include a pedestrian being struck by a forklift. This statistic translates to approximately 19,000 people on an annual basis. Nonetheless frequently or briefly people are around industrial trucks in their work day, there are some basic steps that should be taken in order to keep everyone safe. One of the major factors is that forklift pedestrian mishaps usually happen in situations where the pedestrian is ignorant of safety precautions. Problems also occur more frequently when the pedestrian has become used to frequent interaction with forklifts and ends up complacent. In order to avoid putting yourself at possible risk of being struck by a forklift, there are several common situations to look out for. Among the most common issues is when pedestrians did not see the lift truck. Numerous operations have various degrees of intersections or blind corners which pedestrians need to be aware of. At times pedestrians do not hear the forklift. Be really careful of the various kinds of power sources. For instance, electric trucks may be much quieter compared to internal combustion engines that are super loud. Coming in too close proximity of the equipment is another common concern for pedestrians. In order for a pedestrian to be injured by a forklift, common sense tells us that the pedestrian has to be in close proximity to be struck. For a lift truck that is working, a four foot safety zone is recommended so as to make a safe perimeter for everyone. This helps to address risks like for instance the unit driving accidentally over the foot of a pedestrian. Implementing and following strict safety protocol helps to make certain that the workplace safety stays top notch and remains paramount.
Komatsu: Used Komatsu Diesel Forklift Berkeley - Forklifts are used to raise, engage and transport palletized loads within manufacturing, warehousing, material handling, construction and mining applications. There are 3 basic types of forklifts: a fork truck, manual drive and motorized drive. The travel or load movement is powered manually or by walking at the rear of the machinery with manual-drive forklifts. Motorized-drive model lift trucks are equipped with a motorized drive. In lots of instances, a seat or protected cab is part of the design in order to keep the operator safe and comfortable. Fork trucks are another type which are motorized and include features such as backup alarms and cabs. In order to prevent the vehicle from overturning, some forklifts are counterbalanced. Other types of forklifts include safety rails, a rotating element such as a turntable or different kinds of hand rails. Essential specifications to take into consideration when selecting forklifts consist of stroke and lift capacity. Stroke is defined as the difference between the fully-lowered and the fully-raised lift positions. Lift capacity is the supportable, maximum load or forcforce or load. Additional specifications for lift trucks consist of their tire and fuel type. Different fuel options for lift trucks consist of: LP or liquid propane, CNG or compressed natural gas, diesel fuel, propane, natural gas and gasoline. There are 2 basic kinds of tires utilized for operating fork trucks and forklifts: pneumatic and solid. Solid or cushion tires do not puncture and need less maintenance compared to pneumatic tires. The cushion or solid tires do offer less shock absorption overall. Air-inflated or pneumatic tires however offer excellent drive traction and load-cushioning. For lift trucks, there are 7 classes. Class 1 lift trucks incorporate electric-motor rider trucks, seated or stand-up 3 wheeled units. Usually, rider units are counterbalanced and could have either pneumatic or cushion wheels. Class II lift trucks are electric motor units which are utilized for stock applications or order picking in narrow aisle environments. These types of forklifts provide extra reach functions or swing mast. Class III forklifts are either standing-rider or walk-behind operated electric-motor trucks. Automated pallet lift trucks and high lift models are often counterbalanced units. Class IV forklifts have seated controls and cabs. These types of forklifts are rider fork trucks with internal combustion or IC engines. In addition, this class has cushion or solid tires. Class V forklifts are rider fork trucks. They have seated controls and cabs, pneumatic tires and internal combustion or IC engines. Similar to Class IV forklifts, they are usually counterbalanced. Class VI forklifts are tow tractor lifts that are designed for a sit-down rider. This class is supplied with internal combustion or IC or electric engines. Lastly, Class VII lift trucks are the ideal choice for use on rough terrain areas. They are a common feature in construction, logging and agricultural applications. Class VII lift trucks include all employee carriers and burden carriers.
Genie: Used Genie Boom Lifts Berkeley - For all of your forklift requirements, there are many reasons to pick a Genie Forklift. The products that Genie manufactures are top-of-the-line, with excellent service, and great customer support to help you meet all of your lifting needs. Genie is devoted to making your machinery last and for getting the most out of your machines for the duration of the machine's life. Genie lifts are identifiable with their characteristic blue colour and the company is known for offering exceptional support for its already top-performing, dependable items. Terex Aerial Work Platforms set the bar for the business in terms of making the most desired and innovative lift equipment available. Genie's experienced team of professionals could help to manage your specific challenges with respect to finding the best machinery for your specific business. The hardworking group of dealers and engineers at Genie can provide great support to help keep you safe, your machine safe, keep your technology up to date, and to maximize your units uptime. If you're looking to maximize your investments, Genie also offers restoration and refurbishing services. If you're looking to keep a machinery in your fleet or to sell it for its maximum worth, Genie can help you with the services you require. A Genie Major inspection is backed by factory warranty and is an economical method to make your machinery work better, last longer and make the best use of your resources. Professionals help to take you through the process and make suggestions to help you get the most from every dollar spent and to ensure limited down time and safety. Genie is really devoted to building relationships with its clients to show that you, the customer, are the top priority and to guarantee trust. Not only is Genie focused on keeping its machines running properly, it's focused on maintaining quality customer partnerships. Genie items are made utilizing the newest technologies which adhere to the most strict safety standards to help you get the most value from your investment with the highest quality machine available.
Hyster: Used Hyster Large Capacity Forklifts Berkeley - Big and Jumbo Hyster provides a series of masted top pick trucks, the H1050-1150D-CH line, that could handle as much as 88,185 pounds under the spreader. This allows you the power to move even the heaviest load anywhere it needs to go. The lift capacities of the trucks offer increased container density to enable true 5-high stacking. Thanks to a variety of advances in engineering, these are a few of the most reliable and rugged forklifts available. Like any lift truck manufactured by Hyster, the comfort of the operator is a main part of the overall design. The ComforCab II is an ergonomically advanced design that would be extremely comfortable to ride in. H550-700HD/S If your particular work condition requires a versatile and rugged lift truck, then your ideal machinery is the H550-700HD/S. This performance solution offers a Cummins 6-cylinder diesel engine which is nestled under the gull-wing hood of these lift trucks. This turbocharged engine is efficient, strong and runs extra smooth. Each drive wheel offers extra heavy-duty wet brakes to give superior stopping power. Like every lift truck manufactured by Hyster, the H550-700HD/S is capable of being modified with practically any optional attachment you will need to grab or lift any cargo. H800-1050HD/S Particularly engineered for fork tip visibility, the H800-1050HD/S series provides a front mounted cab. Hyster has taken great care to incorporate proven designs from their very successful container handlers in order to produce the most reliable and powerful lift trucks in the material handling industry. Additionally, the H800-1050HD/S series boasts the newest in comfort with the Hyster ComforCab II. It offers operators "state-of-the-art" design in visibility, ergonomics and driver comfort. This series of forklifts is capable of conquering any challenge. HR45 REACHSTACKER The HR45 Reach stacker Series is capable of turning circles around the competition. This series of reach stacker trucks showcases the sharpest turning radius in the container handling business. Similar to every other forklift made by Hyster, these reach stackers offer amazing ergonomics which are particularly designed and engineered to increase production and decrease operator fatigue. The robust high-strength boom is available with the capacity to stack 8'6" or 9'6" containers 5-high in the first row. Thus, if your application depends on heavy-duty container stacking, this is the Hyster large capacity forklift that will work best for you. Hyster has built its reputation by being at the forefront of the business. They provide solid machinery that is both safe and comfortable as well as efficient to operate. There are numerous sizes and models available in order to meet your requirements.
Hyundai: Used Hyundai Big Forklifts Berkeley - Forklift Truck Training Prior to becoming qualified as an operator, training on a forklift or an industrial-powered lift truck is required. This training is often modified to the specific kind of equipment, any machine attachment to be used by the operator and individual facility. It is really important to have safety foremost on the mind of the trainer or the trainee. General Qualifications For those who want to operate a forklift, they have to be at least 18 years old and have the physical capability to safely control and operate the kind of machine they are training for. Before assuming any operator responsibilities, all operators should be certified properly. Pedestrian Safety When a pedestrian stuck by the machine, this can result in one of the most common types of injuries related to utilizing forklifts. Forklift operators should always yield to pedestrians and utilize their horns when nearing any pedestrian area, intersection or crosswalk. Weather Conditions Loading docks are amongst the most hazardous places to utilize a lift truck. When rain filters in through dock doors that are open, the floor can become very dangerous and slippery. It is very important that forklift operators take these situations into account when working in these kinds of settings. Certification Both hands-on exercises and classroom instructions must be completed in order to become a certified forklift operator. This type of training could be adjusted to meet all the requirements of each and every kind of workplace; for example, incorporating the different attachments that would be utilized on that job site and each specific kind of equipment. Accidents Sadly approximately 100 individuals are killed each year in forklift accidents. Furthermore, there are approximately 100,000 who are injured. With correct forklift training and safe operation of the machines, the majority of these injuries can be avoided all together.
Kalmar: Used Kalmar Reach Stackers Berkeley - Reach Stackers are available IH, intermodal handling models and CH or container handling units for high density container stacking use up to 6-high and 3-rows deep. These different models allow numerous kinds of tasks to be finished. Reach stackers are designed and engineered to create maximum space utilization in container terminals. Furthermore, they offer exceptional handling speeds, better maneuverability and unrestricted stacking capabilities. These machines are made with standard oil-immersed brakes, a modern, clean running Diesel engine, sophisticated auto-shift transmission and strong drive-axle. These features all combine in order to maintain maximum production and total dependability in tough applications during operation. The engine and transmission protection systems combine to offer standard reliable operation, along with oil-immersed brakes. The model's operator cabs feature a large range of standard ergonomic features, and exceptional container visibility in different operating situations. The models which have an increased wheelbase and stabilizers provide increased capacity handling. These machinery require strong boom construction and a solid frame to be able to handle the high capacity handling operation. An engine shutdown function and easy service facilitate service access and minimize service time and cost. Transport hubs, ports and terminals are only a few of the locations that place heavy demands on container handlers. These locations require machines that are very efficient and durable. The company knows what it really takes to be able to efficiently handle empty and laden containers for stacking, unloading and loading between railcar, terminal and road truck. Normally, empty container trucks are known to work at a high pace. These machinery place rigorous demands on both efficiency and speed. Trucks based on the newest technology are capable of handling and lifting containers with the highest speed and stability.
Nissan: Used Nissan Narrow Reach Forklifts Berkeley - Nissan has started to make the first pantograph type reach truck in the industry. This was because of the growing demand for high performing narrow aisle reach trucks. Introducing the new SRX Platinum Series of reach trucks has become part of the North American market. The Australian launch is scheduled to follow very soon. The SRX Platinum Series is available in 3 capacities. These load capacities range from 1360 kilograms to 2000. The system was made because of intensive operator participation on the design. These considerations played a huge part to ensure its acceptance into the incredibly competitive reach truck market within the US. The following excellent safety and operator comfort features have resulted for the Nissan trucks. The entry and exit to the equipment has been simplified thanks to a low step height. The model's side stance design makes driving both forward and reverse more comfortable for the operator. The model is available with a gently sloped floorboard which is in place to sit over 4 vibration isolators. This particular design offers a relaxed driving position for the operator during a standing shift. In addition, the SRX Platinum Series offers a cushioned floor mat to provide a ride which is more enjoyable and smoother. The caster design's dual spring suspension system adds to the overall smoothness of the drive. The suspension also offers a much more stable operation during use on uneven or rough driving surfaces. The thick padding located under the operator's arm further enhances the total comfort factor. There is a cushioned backrest and height adjustable knee pad in place as well. The high operator backrest and the rear overhead guard post on the SRX Series offer additional protection for the operator. This is specially vital when working around racking and in tight locations. Nissan's forklifts have been built with the intuitive and ergonomically designed interior with a multi-function handle, which helps to achieve accurate control while lessening operator comfort. Several of the Operational commands comprise lift and lower, drive, side-shift or other auxiliary function, reach, and the horn can be performed and executed using this single handle.
Doosan: Used Doosan Dual Fuel Forklifts Berkeley - Basic Training Information for LPG Liquid petroleum gas or LPG is a odorless and colorless fuel derived from natural gas. LPG contains 90% propane. It is extracted in a process referred to as distilling. Considerations LPG fuel could be really safe but it must be carefully handled to prevent fire and explosions which could happen with improper maintenance or installation of gas lines. LPG domestic appliances need correct installation and maintenance to avoid mishaps. Prevention For anybody working directly with LPG, accident prevention training is important. Included in training must be correct methods for refueling and methods for checking for leaks. Training should also include knowing how to wear personal protective gear and being alert to dangers like loose fittings or damaged hoses. Emergency Preparation Liquid petroleum gas is a volatile fuel and anyone working with it should be knowledgeable about emergency procedures to follow in the event of explosion or fire. Training should include first aid, evacuation and gas leak control. Fuel Storage Storage of tanks - whether a small fuel canister or a large refueling tank - should be at a secure location a safe distance from any building. "No Smoking" warnings must be posted. To ensure tanks are only accessed by authorized employees, the tanks must be locked in a secure enclosure which is designed to be protected from vehicle impact. Concrete bumpers or other retaining systems are better. The fueling station must have an accessible fire extinguisher. Just those trained to use the fueling station must be permitted to do so. Personnel also must be trained to use the fire extinguisher. Operator Training The Occupational Safety and Health Administration states that anyone using a forklift must undergo a training program consisting of both in-class and practical, hands-on training. Trainees will be tested to make sure that they understand the safety issues associated in forklift operation.
Liebherr: Used Liebherr Construction Cranes Berkeley - During the year 1949, the Liebherr family business was created by Hans Liebherr. His first claim to fame was the success of his affordable and easy-to-assemble mobile tower crane. It was upon this invention that the foundation of the company flourished under. Nowadays, The Liebherr business has grown to become amongst the leading manufacturers in the field of construction machinery. The business has also gained the reputation of being the acknowledged supplier of user-oriented technically innovative products and services in various fields. The company has currently become a "Group" working in every continent with over 35,000 workers and more than 130 companies all over the globe. In order to guarantee a manageable operating size, the Liebherr Group has been divided into various company units. These units have been designed to operate independently. This particular set up enables the company the ability to stay in tune with global competition and be flexible to market signals. What's more, having so many individual company units also ensures customer proximity and keeps customer service operating at an optimum level. Liebherr has instituted the divisional control companies to handle the management operations of production and sales for the individual product segments. The Liebherr Group currently encompasses 10 various product divisions. Liebherr-International AG is the Liebherr Group's holding company. They are located within Bulle, Switzerland and are totally owned by members of the Liebherr family. Currently, the family business is being managed in the 2nd generation by Dr. H.C. Willi Liebherr and his sister Dr. H.C. Isolde Liebherr. Since 2012, some of the active individual divisions have been represented by members of the family in the 3rd generation including: Sophie Albrecht, Jan Liebherr, Stefanie Wohlfarth and Patricia Ruf. These members of the family have been working hard together to help set up the course of the family business in the future. They are staying on top of large-scale industrial projects and residential buildings across the world. Hans Liebherr started to build his company in the year 1949, within a small town called Kirchdorf within southern Germany. Kirchdorf, now supports amongst Liebherr's 20 manufacturing locations. They could average a yearly output of approximately 2800 wheeled excavators and employ more than 1400 people in that particular workforce. The company has enjoyed diversity and immense growth since it first opened its doors. The Liebherr Group continues to remain committed to making and implementing innovative designs. They have earned a successful and positive place within the material handling industry.
Gradall: Used Gradall Telescopic Handlers Berkeley - The telehandlers designed and made by Gradall have made a reputation within the industry for their reliability, strength and low cost of ownership. Furthermore, they are really popular for their exclusive 90-degree rear-pivot steering. This feature is actually what sets Gradall Telescopic Handlers apart from the competition. These machinery could turn sharp corners and offer exceptional maneuverability in even the tightest of work areas, enabling operators to take these machines where other telehandlers are not capable of working. These Gradall machines are capable of moving down narrow aisles as well as back in crowded landing locations with better accuracy and speed. These units can also square-up lumber. The ergonomically designed and spacious equipment cab provide a clear view of the job location. Gradall's telehandlers are outfitted with various kinds of attachments so as to accomplish a wide range of jobs. There is practically nothing a Gradall Telehandler cannot do, in order to accomplish the high performance level you require to get the task finished. JLG Telehandlers Known for their originality, strength and extreme versatility, JLG Telehandlers are main components in JLG's family line of all-wheel-steer telehandlers. Their 5 full-sized models combined with their 1 compact model enable you as well as your business to handle any jobsite challenge with efficiency and ease. These equipment have the capabilities of a centered cab design, a high-boom pivot and better overall visibility. Each and every JLG telehandler can be outfitted with numerous attachments. More versatility, strength and capacity are provided by JLG telehandlers. These machinery make an excellent addition to any fleet. Lots of smaller businesses choose to rent various models and brands prior to deciding to purchase anything so pricey. This is a good option to experiment with the telescopic handlers offered on the market and find the exact model to suit all your requirements. The minute you climb into the cab of a telehandler, your productivity is on the line. The JLG lineup of all-wheel steer telehandlers gives you the reliability, power and maneuverability that has become the expected standard of this world-leading machine manufacturer. With heights of up to 55 feet and load capacities from 5500 to 12,000 pounds any challenge in the jobsite can be attained with these particular choice and place telehandler models.
Toyota: Used Toyota Propane Forklifts Berkeley - Within the business, Toyota has garnered an immense history of environmental stewardship. This stewardship is directed from the corporate doctrine established by Toyota Industries Corporation, that is the parent company. There are not many other businesses, let alone another lift truck manufacturer that could equal Toyota's history of protecting the environment and advancing the economy. For instance, Toyota has started an environmental accounting process that evaluates the efficiency of environmental activities. They look at situations from the viewpoint of cost. This is a main aspect in corporate decision making. Toyota Environmental Guidelines: Toyota has gained a great reputation for its many activities which are considerate of the natural environment. They provide clean and safe products and follow this philosophy through production, design, disposal and use processes. Toyota remains as ever dedicated to the advancement of activities which support the natural environment. The company strives to intensify environmental management for their companies and their consolidated subsidiaries. They also promote knowledge and information disclosure and social contribution. Toyota accomplishes this through vast cooperation with society on environmental protection. This is part of the company's ultimate goal of achieving a better worldwide environment for people to live and breathe in. Toyota has dedicated themselves to being a complete solutions provider. They offer a variety of solutions for their clients covering a diverse range of material handling needs. The company has sought out a range of industrial machine solutions to improve the overall material handling process and enhance the end-user experience. Integrated Scale Toyota's new legal-for-trade integrated scale allows the operator to transport and weigh loads at the same time. This results in increased effectiveness and reduced logistic costs. Toyota has developed an industry exclusive scale-mounted fork positioner option which enables operators to quickly and precisely position the forks without having to leave their seat. Automated Guided Vehicles or AGVs These machines provide clients with a variety of benefits like: higher overall productivity, continuous operation, reduced product damage and improved process flow. These types of vehicles are also known for improving process flow and reducing non-value-added activity. Fleet Management Toyota's Fleet Management Solution surpasses simple aspects of reporting. This revolutionary technology instead analyzes your fleet to make the proper recommendations for delivering a lean fleet. This lean-thinking approach helps to ensure that clients are given optimal fleet performance at the lowest cost of ownership as possible. This is another effective way which Toyota goes above and beyond for all their clients.
Haulotte: Used Haulotte Electric Boom Lifts Berkeley - An Electric boom is an aerial lift allowing maintenance or building work to be done at height and is run by electricity. An electric boom is made with a work platform that could be raised to a required height using a hydraulic drive mechanism; the boom can be articulated, telescopic or vertical mast depending upon the application requirements. Haulotte International is Europe's top manufacturer of electric boom lifts and diesel boom lifts. The company has a full service policy for its clients, providing technical assistance, maintenance of all their lifting equipment. Operating in 100 countries worldwide, Haulotte International has more than 50 models of lifting equipment, all of original design for maximum performance and meet the every safety and quality standard. Haulotte International provides electric boom lifts in the following models: articulated booms, vertical masts, scissors, push around, which could be utilized both indoors and outdoors, according to model. Their speed and long reach make them the ideal tool for shipyards, construction, demolition and maintenance sites, or for putting the finishing touches to works of art. Several models have a jib arm which is handy for overhanging work or for coming in close. All operators of these machines should have some heavy machinery operator training and it is the responsibility of the company to make certain that their machine operators have received the required training. When looking to purchase a forklift boom it is recommended that a forklift be purchased that is equipped with four wheel drive for the most advantages. If buying used machinery it would be essential to test drive the machinery and to make sure that the machinery will properly operate.
Skyjack: Used Skyjack Aerial Work Platforms Lifts Berkeley - SJ 45T & SJ 40T Skyjack provides top-of-the-line product designs which are original and effective. They offer the lowest life cycle costs and the overall best available value with their easy to use and dependable machines. The SJ 45T, along with the SJ 40T boom lifts follow these philosophies. They feature proven design standards such as Skyjack's color coded numbered wiring system and their analog based controls. SJ 61T & SJ 66T Skyjack has continued to add the new SJ 66T and the SJ 61T models to the already existing SJ 45T and SJ 40T boom lift lines. These new models were built with the high quality design standards and philosophies that the company is recognized for. The company offers an exclusive axle based 4-wheel drive system which offers a "Detroit Locker" limited slip rear differential and front differential. These machinery continue to provide proven dependability, easy serviceability and less life cycle costs. Skyjack Reconditioning SJ-Recon is Skyjacks division responsible for fully reconditioning Skyjacks Rough Terrain and Electric Scissors in addition to different boom lift models and Skyjack OEMs. Reconditioning Method Each and every machine has been carefully checked with all safety bulletins and outstanding updates completed prior to disassembly. Prior to being carefully prepped for painting, all weldments are closely checked for any defects. Skyjack's Recon Division has all of the essential tools required to complete a high quality, professional paint job. They provide a state of the art blasting booth as well as a complete paint line and oven. Each Skyjack equipment is meticulously reassembled in order to meet original OEM standards. The following components are replaced with brand new parts: 110V outlet, the hydraulic fluids, hoses and filters, the main electrical cables and main control and joystick controllers. Moreover, each unit receives new batteries, tires and bushings and battery cables and worn pins are replaced.
